[ Aug 17 20:39:49 Enabled. ]
[ Aug 17 20:39:49 Rereading configuration. ]
[ Aug 17 20:39:50 Rereading configuration. ]
[ Aug 17 20:39:52 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:52.767229037Z","hostname":"oxz_oximeter_9ff01f64-1dea-442a-8f13-dde0eebae839","pid":21674,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:52.775091738Z","hostname":"oxz_oximeter_9ff01f64-1dea-442a-8f13-dde0eebae839","pid":21674,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:52.787704149Z","hostname":"oxz_oximeter_9ff01f64-1dea-442a-8f13-dde0eebae839","pid":21674}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:52.792452428Z","hostname":"oxz_oximeter_9ff01f64-1dea-442a-8f13-dde0eebae839","pid":21674}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:52.798954508Z","hostname":"oxz_oximeter_9ff01f64-1dea-442a-8f13-dde0eebae839","pid":21674,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:53.258040055Z","hostname":"oxz_oximeter_9ff01f64-1dea-442a-8f13-dde0eebae839","pid":21674,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:39:53.268392153Z","hostname":"oxz_oximeter_9ff01f64-1dea-442a-8f13-dde0eebae839","pid":21674,"zonename":"\"oxz_oximeter_9ff01f64-1dea-442a-8f13-dde0eebae839\""}
[ Aug 17 20:39:53 Method "start" exited with status 0. ]