[ Aug 17 20:52:28 Enabled. ]
[ Aug 17 20:52:28 Rereading configuration. ]
[ Aug 17 20:52:31 Rereading configuration. ]
[ Aug 17 20:52:37 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:52:37.275089369Z","hostname":"oxz_oximeter_54b9d0b1-dd08-4dff-b4ec-18e71c0cee77","pid":25013,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:52:37.281229473Z","hostname":"oxz_oximeter_54b9d0b1-dd08-4dff-b4ec-18e71c0cee77","pid":25013,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:52:37.288867347Z","hostname":"oxz_oximeter_54b9d0b1-dd08-4dff-b4ec-18e71c0cee77","pid":25013}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:52:37.292758611Z","hostname":"oxz_oximeter_54b9d0b1-dd08-4dff-b4ec-18e71c0cee77","pid":25013}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:52:37.297013955Z","hostname":"oxz_oximeter_54b9d0b1-dd08-4dff-b4ec-18e71c0cee77","pid":25013,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:52:37.756957578Z","hostname":"oxz_oximeter_54b9d0b1-dd08-4dff-b4ec-18e71c0cee77","pid":25013,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-17T20:52:37.764648594Z","hostname":"oxz_oximeter_54b9d0b1-dd08-4dff-b4ec-18e71c0cee77","pid":25013,"zonename":"\"oxz_oximeter_54b9d0b1-dd08-4dff-b4ec-18e71c0cee77\""}
[ Aug 17 20:52:37 Method "start" exited with status 0. ]