[ Aug 19 21:12:37 Enabled. ]
[ Aug 19 21:12:37 Rereading configuration. ]
[ Aug 19 21:12:37 Rereading configuration. ]
[ Aug 19 21:12:40 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-19T21:12:41.132169796Z","hostname":"oxz_crucible_80cdbd72-899b-4b0f-a460-1d098a02ff83","pid":23230,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-19T21:12:41.140631904Z","hostname":"oxz_crucible_80cdbd72-899b-4b0f-a460-1d098a02ff83","pid":23230,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-19T21:12:41.153386573Z","hostname":"oxz_crucible_80cdbd72-899b-4b0f-a460-1d098a02ff83","pid":23230}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-19T21:12:41.160389107Z","hostname":"oxz_crucible_80cdbd72-899b-4b0f-a460-1d098a02ff83","pid":23230}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-19T21:12:41.165314933Z","hostname":"oxz_crucible_80cdbd72-899b-4b0f-a460-1d098a02ff83","pid":23230,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-19T21:12:41.627373996Z","hostname":"oxz_crucible_80cdbd72-899b-4b0f-a460-1d098a02ff83","pid":23230,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-19T21:12:41.650350445Z","hostname":"oxz_crucible_80cdbd72-899b-4b0f-a460-1d098a02ff83","pid":23230,"zonename":"\"oxz_crucible_80cdbd72-899b-4b0f-a460-1d098a02ff83\""}
[ Aug 19 21:12:41 Method "start" exited with status 0. ]