[ Aug 20 02:13:38 Enabled. ]
[ Aug 20 02:13:38 Rereading configuration. ]
[ Aug 20 02:13:40 Rereading configuration. ]
[ Aug 20 02:13:43 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.145401099Z","hostname":"oxz_crucible_26eba778-6322-4e11-9c6b-90e8b1e2a889","pid":22077,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.156021203Z","hostname":"oxz_crucible_26eba778-6322-4e11-9c6b-90e8b1e2a889","pid":22077,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.169765565Z","hostname":"oxz_crucible_26eba778-6322-4e11-9c6b-90e8b1e2a889","pid":22077}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.176271843Z","hostname":"oxz_crucible_26eba778-6322-4e11-9c6b-90e8b1e2a889","pid":22077}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.181679781Z","hostname":"oxz_crucible_26eba778-6322-4e11-9c6b-90e8b1e2a889","pid":22077,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.642253651Z","hostname":"oxz_crucible_26eba778-6322-4e11-9c6b-90e8b1e2a889","pid":22077,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.651613004Z","hostname":"oxz_crucible_26eba778-6322-4e11-9c6b-90e8b1e2a889","pid":22077,"zonename":"\"oxz_crucible_26eba778-6322-4e11-9c6b-90e8b1e2a889\""}
[ Aug 20 02:13:43 Method "start" exited with status 0. ]