[ Aug 20 02:13:38 Enabled. ]
[ Aug 20 02:13:38 Rereading configuration. ]
[ Aug 20 02:13:40 Rereading configuration. ]
[ Aug 20 02:13:43 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.337751227Z","hostname":"oxz_crucible_291e3e55-beb3-476c-a2fa-75cd8216a5c3","pid":22215,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.346925468Z","hostname":"oxz_crucible_291e3e55-beb3-476c-a2fa-75cd8216a5c3","pid":22215,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.358037587Z","hostname":"oxz_crucible_291e3e55-beb3-476c-a2fa-75cd8216a5c3","pid":22215}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.363644887Z","hostname":"oxz_crucible_291e3e55-beb3-476c-a2fa-75cd8216a5c3","pid":22215}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.369697271Z","hostname":"oxz_crucible_291e3e55-beb3-476c-a2fa-75cd8216a5c3","pid":22215,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.829017589Z","hostname":"oxz_crucible_291e3e55-beb3-476c-a2fa-75cd8216a5c3","pid":22215,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T02:13:43.841907274Z","hostname":"oxz_crucible_291e3e55-beb3-476c-a2fa-75cd8216a5c3","pid":22215,"zonename":"\"oxz_crucible_291e3e55-beb3-476c-a2fa-75cd8216a5c3\""}
[ Aug 20 02:13:43 Method "start" exited with status 0. ]