| 1 | | [ Aug 20 07:28:26 Enabled. ] |
| 2 | | [ Aug 20 07:28:26 Rereading configuration. ] |
| 3 | | [ Aug 20 07:28:27 Rereading configuration. ] |
| 4 | | [ Aug 20 07:28:28 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-08-20T07:28:28.270Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService4
|
| 7 | 2026-08-20T07:28:28.274Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService4
|
| 8 | 2026-08-20T07:28:28.281Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-08-20T07:28:28.284Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-08-20T07:28:28.287Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService4"
static address = fd00:1122:3344:101::1b
|
| 11 | 2026-08-20T07:28:28.741Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-08-20T07:28:28.747Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_ntp_671fa105-7919-4162-bd3e-ecc937f11f2f"
|
| 13 | | [ Aug 20 07:28:28 Method "start" exited with status 0. ] |