[ Aug 20 17:59:33 Enabled. ]
[ Aug 20 17:59:33 Rereading configuration. ]
[ Aug 20 17:59:36 Rereading configuration. ]
[ Aug 20 17:59:38 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService15 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.202609978Z","hostname":"oxz_crucible_35cbff10-b396-4946-916a-5f7a4bd55995","pid":22272,"datalink":"oxControlService15"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.208948425Z","hostname":"oxz_crucible_35cbff10-b396-4946-916a-5f7a4bd55995","pid":22272,"datalink":"oxControlService15"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.218232281Z","hostname":"oxz_crucible_35cbff10-b396-4946-916a-5f7a4bd55995","pid":22272}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.223063908Z","hostname":"oxz_crucible_35cbff10-b396-4946-916a-5f7a4bd55995","pid":22272}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.228211871Z","hostname":"oxz_crucible_35cbff10-b396-4946-916a-5f7a4bd55995","pid":22272,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService15\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.688325559Z","hostname":"oxz_crucible_35cbff10-b396-4946-916a-5f7a4bd55995","pid":22272,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.699279358Z","hostname":"oxz_crucible_35cbff10-b396-4946-916a-5f7a4bd55995","pid":22272,"zonename":"\"oxz_crucible_35cbff10-b396-4946-916a-5f7a4bd55995\""}
[ Aug 20 17:59:38 Method "start" exited with status 0. ]