[ Aug 20 17:59:33 Enabled. ]
[ Aug 20 17:59:33 Rereading configuration. ]
[ Aug 20 17:59:36 Rereading configuration. ]
[ Aug 20 17:59:38 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.158627097Z","hostname":"oxz_crucible_6f6c1474-2274-4ecf-854c-07e73a381ecb","pid":22246,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.167556856Z","hostname":"oxz_crucible_6f6c1474-2274-4ecf-854c-07e73a381ecb","pid":22246,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.179665568Z","hostname":"oxz_crucible_6f6c1474-2274-4ecf-854c-07e73a381ecb","pid":22246}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.184539456Z","hostname":"oxz_crucible_6f6c1474-2274-4ecf-854c-07e73a381ecb","pid":22246}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.189495675Z","hostname":"oxz_crucible_6f6c1474-2274-4ecf-854c-07e73a381ecb","pid":22246,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.647631074Z","hostname":"oxz_crucible_6f6c1474-2274-4ecf-854c-07e73a381ecb","pid":22246,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T17:59:38.658014812Z","hostname":"oxz_crucible_6f6c1474-2274-4ecf-854c-07e73a381ecb","pid":22246,"zonename":"\"oxz_crucible_6f6c1474-2274-4ecf-854c-07e73a381ecb\""}
[ Aug 20 17:59:38 Method "start" exited with status 0. ]