[ Aug 20 21:45:03 Enabled. ]
[ Aug 20 21:45:03 Rereading configuration. ]
[ Aug 20 21:45:04 Rereading configuration. ]
[ Aug 20 21:45:06 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T21:45:06.623890346Z","hostname":"oxz_crucible_4bd7feab-e202-4310-b300-de09302fda76","pid":25746,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T21:45:06.630903403Z","hostname":"oxz_crucible_4bd7feab-e202-4310-b300-de09302fda76","pid":25746,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T21:45:06.638034391Z","hostname":"oxz_crucible_4bd7feab-e202-4310-b300-de09302fda76","pid":25746}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T21:45:06.641444293Z","hostname":"oxz_crucible_4bd7feab-e202-4310-b300-de09302fda76","pid":25746}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T21:45:06.647678387Z","hostname":"oxz_crucible_4bd7feab-e202-4310-b300-de09302fda76","pid":25746,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T21:45:07.105391485Z","hostname":"oxz_crucible_4bd7feab-e202-4310-b300-de09302fda76","pid":25746,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-20T21:45:07.115334226Z","hostname":"oxz_crucible_4bd7feab-e202-4310-b300-de09302fda76","pid":25746,"zonename":"\"oxz_crucible_4bd7feab-e202-4310-b300-de09302fda76\""}
[ Aug 20 21:45:07 Method "start" exited with status 0. ]