| 1 | | [ Aug 20 21:43:45 Enabled. ] |
| 2 | | [ Aug 20 21:43:45 Rereading configuration. ] |
| 3 | | [ Aug 20 21:43:46 Rereading configuration. ] |
| 4 | | [ Aug 20 21:43:47 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService2 -s fd00:1122:3344:3::1 -g fd00:1122:3344:3::2"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-08-20T21:43:47.105Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService2
|
| 7 | 2026-08-20T21:43:47.111Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService2
|
| 8 | 2026-08-20T21:43:47.118Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-08-20T21:43:47.121Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-08-20T21:43:47.126Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService2"
static address = fd00:1122:3344:3::1
|
| 11 | 2026-08-20T21:43:47.580Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:3::2
|
| 12 | 2026-08-20T21:43:47.586Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_internal_dns_9999d3a2-9c52-43d6-8972-776fd24f697c"
|
| 13 | | [ Aug 20 21:43:47 Method "start" exited with status 0. ] |