[ Aug 21 17:08:16 Enabled. ]
[ Aug 21 17:08:16 Rereading configuration. ]
[ Aug 21 17:08:18 Rereading configuration. ]
[ Aug 21 17:08:22 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T17:08:22.841763162Z","hostname":"oxz_crucible_02ffc0e3-557c-4d87-a460-0226d3aedbaa","pid":25457,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T17:08:22.851050024Z","hostname":"oxz_crucible_02ffc0e3-557c-4d87-a460-0226d3aedbaa","pid":25457,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T17:08:22.864356651Z","hostname":"oxz_crucible_02ffc0e3-557c-4d87-a460-0226d3aedbaa","pid":25457}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T17:08:22.869163159Z","hostname":"oxz_crucible_02ffc0e3-557c-4d87-a460-0226d3aedbaa","pid":25457}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T17:08:22.874628888Z","hostname":"oxz_crucible_02ffc0e3-557c-4d87-a460-0226d3aedbaa","pid":25457,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T17:08:23.331959794Z","hostname":"oxz_crucible_02ffc0e3-557c-4d87-a460-0226d3aedbaa","pid":25457,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T17:08:23.340520103Z","hostname":"oxz_crucible_02ffc0e3-557c-4d87-a460-0226d3aedbaa","pid":25457,"zonename":"\"oxz_crucible_02ffc0e3-557c-4d87-a460-0226d3aedbaa\""}
[ Aug 21 17:08:23 Method "start" exited with status 0. ]