[ Aug 21 18:39:12 Enabled. ]
[ Aug 21 18:39:12 Rereading configuration. ]
[ Aug 21 18:39:13 Rereading configuration. ]
[ Aug 21 18:39:14 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T18:39:14.638451919Z","hostname":"oxz_oximeter_3eba711b-4d3c-4306-beab-97fba8a381e0","pid":24467,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T18:39:14.646287088Z","hostname":"oxz_oximeter_3eba711b-4d3c-4306-beab-97fba8a381e0","pid":24467,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T18:39:14.655889859Z","hostname":"oxz_oximeter_3eba711b-4d3c-4306-beab-97fba8a381e0","pid":24467}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T18:39:14.660009088Z","hostname":"oxz_oximeter_3eba711b-4d3c-4306-beab-97fba8a381e0","pid":24467}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T18:39:14.663533293Z","hostname":"oxz_oximeter_3eba711b-4d3c-4306-beab-97fba8a381e0","pid":24467,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T18:39:15.119501334Z","hostname":"oxz_oximeter_3eba711b-4d3c-4306-beab-97fba8a381e0","pid":24467,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-21T18:39:15.128017499Z","hostname":"oxz_oximeter_3eba711b-4d3c-4306-beab-97fba8a381e0","pid":24467,"zonename":"\"oxz_oximeter_3eba711b-4d3c-4306-beab-97fba8a381e0\""}
[ Aug 21 18:39:15 Method "start" exited with status 0. ]