| 1 | | [ Aug 22 03:58:42 Enabled. ] |
| 2 | | [ Aug 22 03:58:42 Rereading configuration. ] |
| 3 | | [ Aug 22 03:58:45 Rereading configuration. ] |
| 4 | | [ Aug 22 03:58:58 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-08-22T03:58:58.446Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService18
|
| 7 | 2026-08-22T03:58:58.453Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService18
|
| 8 | 2026-08-22T03:58:58.459Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-08-22T03:58:58.463Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-08-22T03:58:58.466Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService18"
static address = fd00:1122:3344:101::14
|
| 11 | 2026-08-22T03:58:58.926Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-08-22T03:58:58.935Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_5fcd773e-3bc0-4760-99b2-907cccd939da"
|
| 13 | | [ Aug 22 03:58:58 Method "start" exited with status 0. ] |