[ Aug 22 03:58:46 Enabled. ]
[ Aug 22 03:58:46 Rereading configuration. ]
[ Aug 22 03:58:49 Rereading configuration. ]
[ Aug 22 03:59:01 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:01.604205162Z","hostname":"oxz_crucible_6e08cf4d-1040-4f2e-800c-521d2b2af0c3","pid":25692,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:01.609572029Z","hostname":"oxz_crucible_6e08cf4d-1040-4f2e-800c-521d2b2af0c3","pid":25692,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:01.616190009Z","hostname":"oxz_crucible_6e08cf4d-1040-4f2e-800c-521d2b2af0c3","pid":25692}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:01.619308886Z","hostname":"oxz_crucible_6e08cf4d-1040-4f2e-800c-521d2b2af0c3","pid":25692}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:01.622382632Z","hostname":"oxz_crucible_6e08cf4d-1040-4f2e-800c-521d2b2af0c3","pid":25692,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:02.109545938Z","hostname":"oxz_crucible_6e08cf4d-1040-4f2e-800c-521d2b2af0c3","pid":25692,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:02.122791587Z","hostname":"oxz_crucible_6e08cf4d-1040-4f2e-800c-521d2b2af0c3","pid":25692,"zonename":"\"oxz_crucible_6e08cf4d-1040-4f2e-800c-521d2b2af0c3\""}
[ Aug 22 03:59:02 Method "start" exited with status 0. ]