[ Aug 22 03:58:47 Enabled. ]
[ Aug 22 03:58:47 Rereading configuration. ]
[ Aug 22 03:58:51 Rereading configuration. ]
[ Aug 22 03:59:02 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:02.756838715Z","hostname":"oxz_oximeter_0f04d198-84a3-4816-9597-5d7e6bf0574a","pid":25918,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:02.763004077Z","hostname":"oxz_oximeter_0f04d198-84a3-4816-9597-5d7e6bf0574a","pid":25918,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:02.770599085Z","hostname":"oxz_oximeter_0f04d198-84a3-4816-9597-5d7e6bf0574a","pid":25918}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:02.774129719Z","hostname":"oxz_oximeter_0f04d198-84a3-4816-9597-5d7e6bf0574a","pid":25918}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:02.777729644Z","hostname":"oxz_oximeter_0f04d198-84a3-4816-9597-5d7e6bf0574a","pid":25918,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:03.234146354Z","hostname":"oxz_oximeter_0f04d198-84a3-4816-9597-5d7e6bf0574a","pid":25918,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-22T03:59:03.241829973Z","hostname":"oxz_oximeter_0f04d198-84a3-4816-9597-5d7e6bf0574a","pid":25918,"zonename":"\"oxz_oximeter_0f04d198-84a3-4816-9597-5d7e6bf0574a\""}
[ Aug 22 03:59:03 Method "start" exited with status 0. ]