[ Aug 25 09:29:19 Enabled. ]
[ Aug 25 09:29:19 Rereading configuration. ]
[ Aug 25 09:29:22 Rereading configuration. ]
[ Aug 25 09:29:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.180793099Z","hostname":"oxz_crucible_02438eb8-f700-4c74-a4ec-95d63f7be82b","pid":24627,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.18886688Z","hostname":"oxz_crucible_02438eb8-f700-4c74-a4ec-95d63f7be82b","pid":24627,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.202858021Z","hostname":"oxz_crucible_02438eb8-f700-4c74-a4ec-95d63f7be82b","pid":24627}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.206941302Z","hostname":"oxz_crucible_02438eb8-f700-4c74-a4ec-95d63f7be82b","pid":24627}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.211206156Z","hostname":"oxz_crucible_02438eb8-f700-4c74-a4ec-95d63f7be82b","pid":24627,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.669841744Z","hostname":"oxz_crucible_02438eb8-f700-4c74-a4ec-95d63f7be82b","pid":24627,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.68155215Z","hostname":"oxz_crucible_02438eb8-f700-4c74-a4ec-95d63f7be82b","pid":24627,"zonename":"\"oxz_crucible_02438eb8-f700-4c74-a4ec-95d63f7be82b\""}
[ Aug 25 09:29:26 Method "start" exited with status 0. ]