[ Aug 25 09:29:20 Enabled. ]
[ Aug 25 09:29:20 Rereading configuration. ]
[ Aug 25 09:29:22 Rereading configuration. ]
[ Aug 25 09:29:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.552279436Z","hostname":"oxz_crucible_a1853012-9c18-44ff-a16a-dd64b9e94bf3","pid":24947,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.559092368Z","hostname":"oxz_crucible_a1853012-9c18-44ff-a16a-dd64b9e94bf3","pid":24947,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.568434729Z","hostname":"oxz_crucible_a1853012-9c18-44ff-a16a-dd64b9e94bf3","pid":24947}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.574567921Z","hostname":"oxz_crucible_a1853012-9c18-44ff-a16a-dd64b9e94bf3","pid":24947}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:26.579768939Z","hostname":"oxz_crucible_a1853012-9c18-44ff-a16a-dd64b9e94bf3","pid":24947,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:27.03725782Z","hostname":"oxz_crucible_a1853012-9c18-44ff-a16a-dd64b9e94bf3","pid":24947,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T09:29:27.04589328Z","hostname":"oxz_crucible_a1853012-9c18-44ff-a16a-dd64b9e94bf3","pid":24947,"zonename":"\"oxz_crucible_a1853012-9c18-44ff-a16a-dd64b9e94bf3\""}
[ Aug 25 09:29:27 Method "start" exited with status 0. ]