[ Aug 25 20:51:10 Enabled. ]
[ Aug 25 20:51:10 Rereading configuration. ]
[ Aug 25 20:51:11 Rereading configuration. ]
[ Aug 25 20:51:14 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T20:51:14.447734701Z","hostname":"oxz_crucible_7e3b10a6-559e-41c5-99bb-566da713fd83","pid":23061,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T20:51:14.453631734Z","hostname":"oxz_crucible_7e3b10a6-559e-41c5-99bb-566da713fd83","pid":23061,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T20:51:14.465000502Z","hostname":"oxz_crucible_7e3b10a6-559e-41c5-99bb-566da713fd83","pid":23061}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T20:51:14.470097413Z","hostname":"oxz_crucible_7e3b10a6-559e-41c5-99bb-566da713fd83","pid":23061}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T20:51:14.475429367Z","hostname":"oxz_crucible_7e3b10a6-559e-41c5-99bb-566da713fd83","pid":23061,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T20:51:14.938750333Z","hostname":"oxz_crucible_7e3b10a6-559e-41c5-99bb-566da713fd83","pid":23061,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T20:51:14.955287094Z","hostname":"oxz_crucible_7e3b10a6-559e-41c5-99bb-566da713fd83","pid":23061,"zonename":"\"oxz_crucible_7e3b10a6-559e-41c5-99bb-566da713fd83\""}
[ Aug 25 20:51:14 Method "start" exited with status 0. ]