[ Aug 25 23:02:02 Enabled. ]
[ Aug 25 23:02:02 Rereading configuration. ]
[ Aug 25 23:02:03 Rereading configuration. ]
[ Aug 25 23:02:06 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:02:06.894672901Z","hostname":"oxz_oximeter_69faa83d-dc1a-410e-bcc4-b8e748cd6f72","pid":22381,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:02:06.902674495Z","hostname":"oxz_oximeter_69faa83d-dc1a-410e-bcc4-b8e748cd6f72","pid":22381,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:02:06.912490832Z","hostname":"oxz_oximeter_69faa83d-dc1a-410e-bcc4-b8e748cd6f72","pid":22381}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:02:06.918139699Z","hostname":"oxz_oximeter_69faa83d-dc1a-410e-bcc4-b8e748cd6f72","pid":22381}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:02:06.925136128Z","hostname":"oxz_oximeter_69faa83d-dc1a-410e-bcc4-b8e748cd6f72","pid":22381,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:02:07.383878602Z","hostname":"oxz_oximeter_69faa83d-dc1a-410e-bcc4-b8e748cd6f72","pid":22381,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:02:07.395922223Z","hostname":"oxz_oximeter_69faa83d-dc1a-410e-bcc4-b8e748cd6f72","pid":22381,"zonename":"\"oxz_oximeter_69faa83d-dc1a-410e-bcc4-b8e748cd6f72\""}
[ Aug 25 23:02:07 Method "start" exited with status 0. ]