[ Aug 25 23:31:16 Enabled. ]
[ Aug 25 23:31:16 Rereading configuration. ]
[ Aug 25 23:31:18 Rereading configuration. ]
[ Aug 25 23:31:21 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:31:21.516387511Z","hostname":"oxz_crucible_a88ba3b2-dfc2-432a-96ff-83cdcfc5d118","pid":21809,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:31:21.527410738Z","hostname":"oxz_crucible_a88ba3b2-dfc2-432a-96ff-83cdcfc5d118","pid":21809,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:31:21.543945874Z","hostname":"oxz_crucible_a88ba3b2-dfc2-432a-96ff-83cdcfc5d118","pid":21809}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:31:21.550494791Z","hostname":"oxz_crucible_a88ba3b2-dfc2-432a-96ff-83cdcfc5d118","pid":21809}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:31:21.560022488Z","hostname":"oxz_crucible_a88ba3b2-dfc2-432a-96ff-83cdcfc5d118","pid":21809,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:31:22.021736447Z","hostname":"oxz_crucible_a88ba3b2-dfc2-432a-96ff-83cdcfc5d118","pid":21809,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-25T23:31:22.036937647Z","hostname":"oxz_crucible_a88ba3b2-dfc2-432a-96ff-83cdcfc5d118","pid":21809,"zonename":"\"oxz_crucible_a88ba3b2-dfc2-432a-96ff-83cdcfc5d118\""}
[ Aug 25 23:31:22 Method "start" exited with status 0. ]