[ Aug 26 15:08:26 Enabled. ]
[ Aug 26 15:08:26 Rereading configuration. ]
[ Aug 26 15:08:27 Rereading configuration. ]
[ Aug 26 15:08:31 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:08:31.866738909Z","hostname":"oxz_crucible_ebf2090f-bb44-434d-a6b0-6376546cbcc8","pid":23540,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:08:31.876721891Z","hostname":"oxz_crucible_ebf2090f-bb44-434d-a6b0-6376546cbcc8","pid":23540,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:08:31.887279521Z","hostname":"oxz_crucible_ebf2090f-bb44-434d-a6b0-6376546cbcc8","pid":23540}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:08:31.893161963Z","hostname":"oxz_crucible_ebf2090f-bb44-434d-a6b0-6376546cbcc8","pid":23540}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:08:31.899178177Z","hostname":"oxz_crucible_ebf2090f-bb44-434d-a6b0-6376546cbcc8","pid":23540,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:08:32.359998143Z","hostname":"oxz_crucible_ebf2090f-bb44-434d-a6b0-6376546cbcc8","pid":23540,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:08:32.370122608Z","hostname":"oxz_crucible_ebf2090f-bb44-434d-a6b0-6376546cbcc8","pid":23540,"zonename":"\"oxz_crucible_ebf2090f-bb44-434d-a6b0-6376546cbcc8\""}
[ Aug 26 15:08:32 Method "start" exited with status 0. ]