[ Aug 26 15:06:43 Enabled. ]
[ Aug 26 15:06:43 Rereading configuration. ]
[ Aug 26 15:06:43 Rereading configuration. ]
[ Aug 26 15:06:44 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService2 -s fd00:1122:3344:2::1 -g fd00:1122:3344:2::2"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:06:44.93405862Z","hostname":"oxz_internal_dns_b3cfc6e5-ab25-421c-90b2-a4f78122ddf5","pid":5456,"datalink":"oxControlService2"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:06:44.939904572Z","hostname":"oxz_internal_dns_b3cfc6e5-ab25-421c-90b2-a4f78122ddf5","pid":5456,"datalink":"oxControlService2"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:06:44.946422952Z","hostname":"oxz_internal_dns_b3cfc6e5-ab25-421c-90b2-a4f78122ddf5","pid":5456}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:06:44.94946622Z","hostname":"oxz_internal_dns_b3cfc6e5-ab25-421c-90b2-a4f78122ddf5","pid":5456}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:06:44.952444956Z","hostname":"oxz_internal_dns_b3cfc6e5-ab25-421c-90b2-a4f78122ddf5","pid":5456,"static address":"fd00:1122:3344:2::1","data link":"\"oxControlService2\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:06:45.405955512Z","hostname":"oxz_internal_dns_b3cfc6e5-ab25-421c-90b2-a4f78122ddf5","pid":5456,"gateway":"fd00:1122:3344:2::2"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T15:06:45.411285787Z","hostname":"oxz_internal_dns_b3cfc6e5-ab25-421c-90b2-a4f78122ddf5","pid":5456,"zonename":"\"oxz_internal_dns_b3cfc6e5-ab25-421c-90b2-a4f78122ddf5\""}
[ Aug 26 15:06:45 Method "start" exited with status 0. ]