[ Aug 26 16:30:48 Enabled. ]
[ Aug 26 16:30:48 Rereading configuration. ]
[ Aug 26 16:30:50 Rereading configuration. ]
[ Aug 26 16:30:55 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService15 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:55.884482489Z","hostname":"oxz_crucible_920175fa-84f0-4db5-8d3f-8a58cf7eebe3","pid":28155,"datalink":"oxControlService15"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:55.888760565Z","hostname":"oxz_crucible_920175fa-84f0-4db5-8d3f-8a58cf7eebe3","pid":28155,"datalink":"oxControlService15"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:55.898992802Z","hostname":"oxz_crucible_920175fa-84f0-4db5-8d3f-8a58cf7eebe3","pid":28155}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:55.904930612Z","hostname":"oxz_crucible_920175fa-84f0-4db5-8d3f-8a58cf7eebe3","pid":28155}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:55.911052804Z","hostname":"oxz_crucible_920175fa-84f0-4db5-8d3f-8a58cf7eebe3","pid":28155,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService15\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:56.377552933Z","hostname":"oxz_crucible_920175fa-84f0-4db5-8d3f-8a58cf7eebe3","pid":28155,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:56.393888021Z","hostname":"oxz_crucible_920175fa-84f0-4db5-8d3f-8a58cf7eebe3","pid":28155,"zonename":"\"oxz_crucible_920175fa-84f0-4db5-8d3f-8a58cf7eebe3\""}
[ Aug 26 16:30:56 Method "start" exited with status 0. ]