[ Aug 26 16:30:47 Enabled. ]
[ Aug 26 16:30:47 Rereading configuration. ]
[ Aug 26 16:30:51 Rereading configuration. ]
[ Aug 26 16:30:55 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:55.500312327Z","hostname":"oxz_crucible_a70dfd40-f7a1-4185-9ebc-a748dfce220a","pid":27973,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:55.508503426Z","hostname":"oxz_crucible_a70dfd40-f7a1-4185-9ebc-a748dfce220a","pid":27973,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:55.521225564Z","hostname":"oxz_crucible_a70dfd40-f7a1-4185-9ebc-a748dfce220a","pid":27973}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:55.526443648Z","hostname":"oxz_crucible_a70dfd40-f7a1-4185-9ebc-a748dfce220a","pid":27973}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:55.532893793Z","hostname":"oxz_crucible_a70dfd40-f7a1-4185-9ebc-a748dfce220a","pid":27973,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:55.992466573Z","hostname":"oxz_crucible_a70dfd40-f7a1-4185-9ebc-a748dfce220a","pid":27973,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-26T16:30:56.0050423Z","hostname":"oxz_crucible_a70dfd40-f7a1-4185-9ebc-a748dfce220a","pid":27973,"zonename":"\"oxz_crucible_a70dfd40-f7a1-4185-9ebc-a748dfce220a\""}
[ Aug 26 16:30:56 Method "start" exited with status 0. ]