[ Aug 27 01:40:15 Enabled. ]
[ Aug 27 01:40:15 Rereading configuration. ]
[ Aug 27 01:40:20 Rereading configuration. ]
[ Aug 27 01:40:28 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:28.971776177Z","hostname":"oxz_crucible_6fe0713b-7968-4c2d-a27e-ba3fc734851a","pid":26068,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:28.977038733Z","hostname":"oxz_crucible_6fe0713b-7968-4c2d-a27e-ba3fc734851a","pid":26068,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:28.985778621Z","hostname":"oxz_crucible_6fe0713b-7968-4c2d-a27e-ba3fc734851a","pid":26068}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:28.989895583Z","hostname":"oxz_crucible_6fe0713b-7968-4c2d-a27e-ba3fc734851a","pid":26068}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:28.993962948Z","hostname":"oxz_crucible_6fe0713b-7968-4c2d-a27e-ba3fc734851a","pid":26068,"static address":"fd00:1122:3344:101::1a","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:29.450166853Z","hostname":"oxz_crucible_6fe0713b-7968-4c2d-a27e-ba3fc734851a","pid":26068,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:29.458253367Z","hostname":"oxz_crucible_6fe0713b-7968-4c2d-a27e-ba3fc734851a","pid":26068,"zonename":"\"oxz_crucible_6fe0713b-7968-4c2d-a27e-ba3fc734851a\""}
[ Aug 27 01:40:29 Method "start" exited with status 0. ]