[ Aug 27 01:40:14 Enabled. ]
[ Aug 27 01:40:14 Rereading configuration. ]
[ Aug 27 01:40:19 Rereading configuration. ]
[ Aug 27 01:40:28 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:28.677175629Z","hostname":"oxz_crucible_e90b3205-3cff-4c42-87b2-4bd4e1ff015f","pid":25839,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:28.683718585Z","hostname":"oxz_crucible_e90b3205-3cff-4c42-87b2-4bd4e1ff015f","pid":25839,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:28.691624443Z","hostname":"oxz_crucible_e90b3205-3cff-4c42-87b2-4bd4e1ff015f","pid":25839}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:28.695212123Z","hostname":"oxz_crucible_e90b3205-3cff-4c42-87b2-4bd4e1ff015f","pid":25839}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:28.699154447Z","hostname":"oxz_crucible_e90b3205-3cff-4c42-87b2-4bd4e1ff015f","pid":25839,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:29.155116921Z","hostname":"oxz_crucible_e90b3205-3cff-4c42-87b2-4bd4e1ff015f","pid":25839,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:40:29.162765817Z","hostname":"oxz_crucible_e90b3205-3cff-4c42-87b2-4bd4e1ff015f","pid":25839,"zonename":"\"oxz_crucible_e90b3205-3cff-4c42-87b2-4bd4e1ff015f\""}
[ Aug 27 01:40:29 Method "start" exited with status 0. ]