[ Aug 27 01:48:55 Enabled. ]
[ Aug 27 01:48:55 Rereading configuration. ]
[ Aug 27 01:48:56 Rereading configuration. ]
[ Aug 27 01:48:59 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:48:59.40656076Z","hostname":"oxz_crucible_31fb66bd-44fd-47c6-a908-ba70681a9c16","pid":21346,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:48:59.416754056Z","hostname":"oxz_crucible_31fb66bd-44fd-47c6-a908-ba70681a9c16","pid":21346,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:48:59.42761472Z","hostname":"oxz_crucible_31fb66bd-44fd-47c6-a908-ba70681a9c16","pid":21346}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:48:59.432939651Z","hostname":"oxz_crucible_31fb66bd-44fd-47c6-a908-ba70681a9c16","pid":21346}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:48:59.437929888Z","hostname":"oxz_crucible_31fb66bd-44fd-47c6-a908-ba70681a9c16","pid":21346,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:48:59.905066636Z","hostname":"oxz_crucible_31fb66bd-44fd-47c6-a908-ba70681a9c16","pid":21346,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-27T01:48:59.920761856Z","hostname":"oxz_crucible_31fb66bd-44fd-47c6-a908-ba70681a9c16","pid":21346,"zonename":"\"oxz_crucible_31fb66bd-44fd-47c6-a908-ba70681a9c16\""}
[ Aug 27 01:48:59 Method "start" exited with status 0. ]