[ Aug 28 00:19:31 Enabled. ]
[ Aug 28 00:19:31 Rereading configuration. ]
[ Aug 28 00:19:33 Rereading configuration. ]
[ Aug 28 00:19:37 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:37.844976186Z","hostname":"oxz_crucible_fe9d2bd8-1992-482f-99a0-c48b16719cfe","pid":24249,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:37.850581583Z","hostname":"oxz_crucible_fe9d2bd8-1992-482f-99a0-c48b16719cfe","pid":24249,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:37.857261683Z","hostname":"oxz_crucible_fe9d2bd8-1992-482f-99a0-c48b16719cfe","pid":24249}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:37.860387459Z","hostname":"oxz_crucible_fe9d2bd8-1992-482f-99a0-c48b16719cfe","pid":24249}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:37.863978294Z","hostname":"oxz_crucible_fe9d2bd8-1992-482f-99a0-c48b16719cfe","pid":24249,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:38.322716821Z","hostname":"oxz_crucible_fe9d2bd8-1992-482f-99a0-c48b16719cfe","pid":24249,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:38.333310803Z","hostname":"oxz_crucible_fe9d2bd8-1992-482f-99a0-c48b16719cfe","pid":24249,"zonename":"\"oxz_crucible_fe9d2bd8-1992-482f-99a0-c48b16719cfe\""}
[ Aug 28 00:19:38 Method "start" exited with status 0. ]