[ Aug 28 00:19:32 Enabled. ]
[ Aug 28 00:19:32 Rereading configuration. ]
[ Aug 28 00:19:34 Rereading configuration. ]
[ Aug 28 00:19:38 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:38.088118878Z","hostname":"oxz_oximeter_c8885e6b-2b6c-4d7e-9f12-e63bf408c4e3","pid":24305,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:38.09442578Z","hostname":"oxz_oximeter_c8885e6b-2b6c-4d7e-9f12-e63bf408c4e3","pid":24305,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:38.102669182Z","hostname":"oxz_oximeter_c8885e6b-2b6c-4d7e-9f12-e63bf408c4e3","pid":24305}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:38.107090275Z","hostname":"oxz_oximeter_c8885e6b-2b6c-4d7e-9f12-e63bf408c4e3","pid":24305}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:38.111178421Z","hostname":"oxz_oximeter_c8885e6b-2b6c-4d7e-9f12-e63bf408c4e3","pid":24305,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:38.567475447Z","hostname":"oxz_oximeter_c8885e6b-2b6c-4d7e-9f12-e63bf408c4e3","pid":24305,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-28T00:19:38.575357082Z","hostname":"oxz_oximeter_c8885e6b-2b6c-4d7e-9f12-e63bf408c4e3","pid":24305,"zonename":"\"oxz_oximeter_c8885e6b-2b6c-4d7e-9f12-e63bf408c4e3\""}
[ Aug 28 00:19:38 Method "start" exited with status 0. ]