| 1 | | [ Aug 28 19:29:44 Enabled. ] |
| 2 | | [ Aug 28 19:29:44 Rereading configuration. ] |
| 3 | | [ Aug 28 19:29:45 Rereading configuration. ] |
| 4 | | [ Aug 28 19:29:46 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService28 -s fd00:1122:3344:101::c -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-08-28T19:29:46.043Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService28
|
| 7 | 2026-08-28T19:29:46.050Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService28
|
| 8 | 2026-08-28T19:29:46.059Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-08-28T19:29:46.063Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-08-28T19:29:46.067Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService28"
static address = fd00:1122:3344:101::c
|
| 11 | 2026-08-28T19:29:46.522Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-08-28T19:29:46.530Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_nexus_6fca1816-3a7a-4a27-9e4b-658742973c3b"
|
| 13 | | [ Aug 28 19:29:46 Method "start" exited with status 0. ] |