| 1 | | [ Aug 29 05:00:29 Enabled. ] |
| 2 | | [ Aug 29 05:00:29 Rereading configuration. ] |
| 3 | | [ Aug 29 05:00:31 Rereading configuration. ] |
| 4 | | [ Aug 29 05:00:33 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::1a -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-08-29T05:00:33.978Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService18
|
| 7 | 2026-08-29T05:00:33.988Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService18
|
| 8 | 2026-08-29T05:00:34.000Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-08-29T05:00:34.007Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-08-29T05:00:34.022Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService18"
static address = fd00:1122:3344:101::1a
|
| 11 | 2026-08-29T05:00:34.485Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-08-29T05:00:34.497Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_79dee606-ffba-4c41-87de-70cf17a4ad88"
|
| 13 | | [ Aug 29 05:00:34 Method "start" exited with status 0. ] |