| 1 | | [ Aug 29 21:35:36 Enabled. ] |
| 2 | | [ Aug 29 21:35:36 Rereading configuration. ] |
| 3 | | [ Aug 29 21:35:37 Rereading configuration. ] |
| 4 | | [ Aug 29 21:35:38 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService8 -s fd00:1122:3344:101::3 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-08-29T21:35:38.379Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService8
|
| 7 | 2026-08-29T21:35:38.383Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService8
|
| 8 | 2026-08-29T21:35:38.391Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-08-29T21:35:38.394Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-08-29T21:35:38.397Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService8"
static address = fd00:1122:3344:101::3
|
| 11 | 2026-08-29T21:35:38.853Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-08-29T21:35:38.859Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_cockroachdb_ef07e0a0-80d3-4131-b233-a73cdb2c86fd"
|
| 13 | | [ Aug 29 21:35:38 Method "start" exited with status 0. ] |