| 1 | | [ Aug 31 13:41:54 Enabled. ] |
| 2 | | [ Aug 31 13:41:54 Rereading configuration. ] |
| 3 | | [ Aug 31 13:41:55 Rereading configuration. ] |
| 4 | | [ Aug 31 13:41:57 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService6 -s fd00:1122:3344:101::6 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-08-31T13:41:57.886Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService6
|
| 7 | 2026-08-31T13:41:57.891Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService6
|
| 8 | 2026-08-31T13:41:57.899Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-08-31T13:41:57.902Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-08-31T13:41:57.906Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService6"
static address = fd00:1122:3344:101::6
|
| 11 | 2026-08-31T13:41:58.360Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-08-31T13:41:58.367Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_cockroachdb_41613737-2b6f-4448-b908-d10cf4258a19"
|
| 13 | | [ Aug 31 13:41:58 Method "start" exited with status 0. ] |