| 1 | | [ Aug 31 13:41:21 Enabled. ] |
| 2 | | [ Aug 31 13:41:21 Rereading configuration. ] |
| 3 | | [ Aug 31 13:41:22 Rereading configuration. ] |
| 4 | | [ Aug 31 13:41:23 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-08-31T13:41:23.315Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService4
|
| 7 | 2026-08-31T13:41:23.319Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService4
|
| 8 | 2026-08-31T13:41:23.326Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-08-31T13:41:23.328Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-08-31T13:41:23.332Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService4"
static address = fd00:1122:3344:101::1b
|
| 11 | 2026-08-31T13:41:23.785Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-08-31T13:41:23.791Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_ntp_3d1c7683-694a-494e-8403-57ec9b0876cf"
|
| 13 | | [ Aug 31 13:41:23 Method "start" exited with status 0. ] |