[ Aug 31 15:43:57 Enabled. ]
[ Aug 31 15:43:57 Rereading configuration. ]
[ Aug 31 15:43:58 Rereading configuration. ]
[ Aug 31 15:44:00 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T15:44:01.082166634Z","hostname":"oxz_oximeter_7f9a257a-154f-434a-9798-b489dc4bee82","pid":22823,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T15:44:01.093987817Z","hostname":"oxz_oximeter_7f9a257a-154f-434a-9798-b489dc4bee82","pid":22823,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T15:44:01.108534863Z","hostname":"oxz_oximeter_7f9a257a-154f-434a-9798-b489dc4bee82","pid":22823}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T15:44:01.113971378Z","hostname":"oxz_oximeter_7f9a257a-154f-434a-9798-b489dc4bee82","pid":22823}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T15:44:01.119150758Z","hostname":"oxz_oximeter_7f9a257a-154f-434a-9798-b489dc4bee82","pid":22823,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T15:44:01.586293297Z","hostname":"oxz_oximeter_7f9a257a-154f-434a-9798-b489dc4bee82","pid":22823,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T15:44:01.606024172Z","hostname":"oxz_oximeter_7f9a257a-154f-434a-9798-b489dc4bee82","pid":22823,"zonename":"\"oxz_oximeter_7f9a257a-154f-434a-9798-b489dc4bee82\""}
[ Aug 31 15:44:01 Method "start" exited with status 0. ]