[ Aug 31 16:29:56 Enabled. ]
[ Aug 31 16:29:56 Rereading configuration. ]
[ Aug 31 16:29:57 Rereading configuration. ]
[ Aug 31 16:29:59 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T16:29:59.439931897Z","hostname":"oxz_crucible_8e702a32-dab7-490a-8898-f83c5334ff34","pid":20098,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T16:29:59.448108657Z","hostname":"oxz_crucible_8e702a32-dab7-490a-8898-f83c5334ff34","pid":20098,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T16:29:59.460196942Z","hostname":"oxz_crucible_8e702a32-dab7-490a-8898-f83c5334ff34","pid":20098}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T16:29:59.466389408Z","hostname":"oxz_crucible_8e702a32-dab7-490a-8898-f83c5334ff34","pid":20098}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T16:29:59.471931987Z","hostname":"oxz_crucible_8e702a32-dab7-490a-8898-f83c5334ff34","pid":20098,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T16:29:59.934877984Z","hostname":"oxz_crucible_8e702a32-dab7-490a-8898-f83c5334ff34","pid":20098,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T16:29:59.948886951Z","hostname":"oxz_crucible_8e702a32-dab7-490a-8898-f83c5334ff34","pid":20098,"zonename":"\"oxz_crucible_8e702a32-dab7-490a-8898-f83c5334ff34\""}
[ Aug 31 16:29:59 Method "start" exited with status 0. ]