[ Aug 31 21:31:51 Enabled. ]
[ Aug 31 21:31:51 Rereading configuration. ]
[ Aug 31 21:31:54 Rereading configuration. ]
[ Aug 31 21:31:56 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:56.649135792Z","hostname":"oxz_crucible_54c8a87b-1097-4bd1-ac54-b9a935517bfe","pid":26096,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:56.657137283Z","hostname":"oxz_crucible_54c8a87b-1097-4bd1-ac54-b9a935517bfe","pid":26096,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:56.670181955Z","hostname":"oxz_crucible_54c8a87b-1097-4bd1-ac54-b9a935517bfe","pid":26096}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:56.67468665Z","hostname":"oxz_crucible_54c8a87b-1097-4bd1-ac54-b9a935517bfe","pid":26096}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:56.679540519Z","hostname":"oxz_crucible_54c8a87b-1097-4bd1-ac54-b9a935517bfe","pid":26096,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:57.13685031Z","hostname":"oxz_crucible_54c8a87b-1097-4bd1-ac54-b9a935517bfe","pid":26096,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:57.147125584Z","hostname":"oxz_crucible_54c8a87b-1097-4bd1-ac54-b9a935517bfe","pid":26096,"zonename":"\"oxz_crucible_54c8a87b-1097-4bd1-ac54-b9a935517bfe\""}
[ Aug 31 21:31:57 Method "start" exited with status 0. ]