[ Aug 31 21:31:51 Enabled. ]
[ Aug 31 21:31:51 Rereading configuration. ]
[ Aug 31 21:31:52 Rereading configuration. ]
[ Aug 31 21:31:55 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::15 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:55.662664645Z","hostname":"oxz_crucible_1cb92e85-9fea-44ea-acf3-ba8a35c1a452","pid":25602,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:55.673626785Z","hostname":"oxz_crucible_1cb92e85-9fea-44ea-acf3-ba8a35c1a452","pid":25602,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:55.684457675Z","hostname":"oxz_crucible_1cb92e85-9fea-44ea-acf3-ba8a35c1a452","pid":25602}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:55.689703918Z","hostname":"oxz_crucible_1cb92e85-9fea-44ea-acf3-ba8a35c1a452","pid":25602}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:55.695277134Z","hostname":"oxz_crucible_1cb92e85-9fea-44ea-acf3-ba8a35c1a452","pid":25602,"static address":"fd00:1122:3344:101::15","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:56.155925129Z","hostname":"oxz_crucible_1cb92e85-9fea-44ea-acf3-ba8a35c1a452","pid":25602,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-08-31T21:31:56.166582826Z","hostname":"oxz_crucible_1cb92e85-9fea-44ea-acf3-ba8a35c1a452","pid":25602,"zonename":"\"oxz_crucible_1cb92e85-9fea-44ea-acf3-ba8a35c1a452\""}
[ Aug 31 21:31:56 Method "start" exited with status 0. ]