[ Sep  1 23:37:53 Enabled. ]
[ Sep  1 23:37:53 Rereading configuration. ]
[ Sep  1 23:37:56 Rereading configuration. ]
[ Sep  1 23:38:01 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-01T23:38:01.237536693Z","hostname":"oxz_crucible_ecefe2f9-2482-4a3f-85f5-ffd9a7ab3180","pid":23722,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-01T23:38:01.244697446Z","hostname":"oxz_crucible_ecefe2f9-2482-4a3f-85f5-ffd9a7ab3180","pid":23722,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-01T23:38:01.253266582Z","hostname":"oxz_crucible_ecefe2f9-2482-4a3f-85f5-ffd9a7ab3180","pid":23722}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-01T23:38:01.257963178Z","hostname":"oxz_crucible_ecefe2f9-2482-4a3f-85f5-ffd9a7ab3180","pid":23722}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-01T23:38:01.262344758Z","hostname":"oxz_crucible_ecefe2f9-2482-4a3f-85f5-ffd9a7ab3180","pid":23722,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-01T23:38:01.717207811Z","hostname":"oxz_crucible_ecefe2f9-2482-4a3f-85f5-ffd9a7ab3180","pid":23722,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-01T23:38:01.723777687Z","hostname":"oxz_crucible_ecefe2f9-2482-4a3f-85f5-ffd9a7ab3180","pid":23722,"zonename":"\"oxz_crucible_ecefe2f9-2482-4a3f-85f5-ffd9a7ab3180\""}
[ Sep  1 23:38:01 Method "start" exited with status 0. ]