[ Sep  3 02:12:55 Enabled. ]
[ Sep  3 02:12:55 Rereading configuration. ]
[ Sep  3 02:12:57 Rereading configuration. ]
[ Sep  3 02:13:00 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService28 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-03T02:13:00.402843907Z","hostname":"oxz_crucible_49cbf5da-7efa-415e-9408-9990867bd7bf","pid":21604,"datalink":"oxControlService28"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-03T02:13:00.415903707Z","hostname":"oxz_crucible_49cbf5da-7efa-415e-9408-9990867bd7bf","pid":21604,"datalink":"oxControlService28"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-03T02:13:00.432156615Z","hostname":"oxz_crucible_49cbf5da-7efa-415e-9408-9990867bd7bf","pid":21604}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-03T02:13:00.438708486Z","hostname":"oxz_crucible_49cbf5da-7efa-415e-9408-9990867bd7bf","pid":21604}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-03T02:13:00.446537496Z","hostname":"oxz_crucible_49cbf5da-7efa-415e-9408-9990867bd7bf","pid":21604,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService28\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-03T02:13:00.906092644Z","hostname":"oxz_crucible_49cbf5da-7efa-415e-9408-9990867bd7bf","pid":21604,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-03T02:13:00.916262015Z","hostname":"oxz_crucible_49cbf5da-7efa-415e-9408-9990867bd7bf","pid":21604,"zonename":"\"oxz_crucible_49cbf5da-7efa-415e-9408-9990867bd7bf\""}
[ Sep  3 02:13:00 Method "start" exited with status 0. ]