| 1 | | [ Sep 4 23:14:28 Enabled. ] |
| 2 | | [ Sep 4 23:14:28 Rereading configuration. ] |
| 3 | | [ Sep 4 23:14:30 Rereading configuration. ] |
| 4 | | [ Sep 4 23:14:32 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService25 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-09-04T23:14:32.993Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService25
|
| 7 | 2026-09-04T23:14:33.008Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService25
|
| 8 | 2026-09-04T23:14:33.022Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-09-04T23:14:33.027Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-09-04T23:14:33.034Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService25"
static address = fd00:1122:3344:101::19
|
| 11 | 2026-09-04T23:14:33.493Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-09-04T23:14:33.503Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_d11097de-599a-402c-8020-88aa56934510"
|
| 13 | | [ Sep 4 23:14:33 Method "start" exited with status 0. ] |