[ Sep  4 23:40:27 Enabled. ]
[ Sep  4 23:40:27 Rereading configuration. ]
[ Sep  4 23:40:29 Rereading configuration. ]
[ Sep  4 23:40:33 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-04T23:40:33.063094836Z","hostname":"oxz_crucible_4caa34dd-dbef-4c24-80dd-22fbb1cb8940","pid":23426,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-04T23:40:33.073697684Z","hostname":"oxz_crucible_4caa34dd-dbef-4c24-80dd-22fbb1cb8940","pid":23426,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-04T23:40:33.083782179Z","hostname":"oxz_crucible_4caa34dd-dbef-4c24-80dd-22fbb1cb8940","pid":23426}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-04T23:40:33.089949121Z","hostname":"oxz_crucible_4caa34dd-dbef-4c24-80dd-22fbb1cb8940","pid":23426}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-04T23:40:33.094856179Z","hostname":"oxz_crucible_4caa34dd-dbef-4c24-80dd-22fbb1cb8940","pid":23426,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-04T23:40:33.549795634Z","hostname":"oxz_crucible_4caa34dd-dbef-4c24-80dd-22fbb1cb8940","pid":23426,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-04T23:40:33.557615609Z","hostname":"oxz_crucible_4caa34dd-dbef-4c24-80dd-22fbb1cb8940","pid":23426,"zonename":"\"oxz_crucible_4caa34dd-dbef-4c24-80dd-22fbb1cb8940\""}
[ Sep  4 23:40:33 Method "start" exited with status 0. ]