[ Sep  5 00:24:49 Enabled. ]
[ Sep  5 00:24:49 Rereading configuration. ]
[ Sep  5 00:24:50 Rereading configuration. ]
[ Sep  5 00:24:51 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T00:24:51.834846613Z","hostname":"oxz_crucible_60bd424e-78d8-4876-998b-9c8072e629c8","pid":22430,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T00:24:51.843335313Z","hostname":"oxz_crucible_60bd424e-78d8-4876-998b-9c8072e629c8","pid":22430,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T00:24:51.854689313Z","hostname":"oxz_crucible_60bd424e-78d8-4876-998b-9c8072e629c8","pid":22430}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T00:24:51.859842099Z","hostname":"oxz_crucible_60bd424e-78d8-4876-998b-9c8072e629c8","pid":22430}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T00:24:51.864598163Z","hostname":"oxz_crucible_60bd424e-78d8-4876-998b-9c8072e629c8","pid":22430,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T00:24:52.322277952Z","hostname":"oxz_crucible_60bd424e-78d8-4876-998b-9c8072e629c8","pid":22430,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T00:24:52.330797351Z","hostname":"oxz_crucible_60bd424e-78d8-4876-998b-9c8072e629c8","pid":22430,"zonename":"\"oxz_crucible_60bd424e-78d8-4876-998b-9c8072e629c8\""}
[ Sep  5 00:24:52 Method "start" exited with status 0. ]