| 1 | | [ Sep 5 00:24:49 Enabled. ] |
| 2 | | [ Sep 5 00:24:49 Rereading configuration. ] |
| 3 | | [ Sep 5 00:24:50 Rereading configuration. ] |
| 4 | | [ Sep 5 00:24:51 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-09-05T00:24:51.834Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService13
|
| 7 | 2026-09-05T00:24:51.843Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService13
|
| 8 | 2026-09-05T00:24:51.854Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-09-05T00:24:51.859Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-09-05T00:24:51.864Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService13"
static address = fd00:1122:3344:101::14
|
| 11 | 2026-09-05T00:24:52.322Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-09-05T00:24:52.330Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_60bd424e-78d8-4876-998b-9c8072e629c8"
|
| 13 | | [ Sep 5 00:24:52 Method "start" exited with status 0. ] |