[ Sep  5 01:35:18 Enabled. ]
[ Sep  5 01:35:18 Rereading configuration. ]
[ Sep  5 01:35:19 Rereading configuration. ]
[ Sep  5 01:35:21 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService28 -s fd00:1122:3344:101::18 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T01:35:21.363206679Z","hostname":"oxz_crucible_c01daf8e-bcf3-4a86-98b5-fc5856e4a472","pid":23129,"datalink":"oxControlService28"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T01:35:21.374105898Z","hostname":"oxz_crucible_c01daf8e-bcf3-4a86-98b5-fc5856e4a472","pid":23129,"datalink":"oxControlService28"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T01:35:21.385894283Z","hostname":"oxz_crucible_c01daf8e-bcf3-4a86-98b5-fc5856e4a472","pid":23129}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T01:35:21.393788357Z","hostname":"oxz_crucible_c01daf8e-bcf3-4a86-98b5-fc5856e4a472","pid":23129}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T01:35:21.399534482Z","hostname":"oxz_crucible_c01daf8e-bcf3-4a86-98b5-fc5856e4a472","pid":23129,"static address":"fd00:1122:3344:101::18","data link":"\"oxControlService28\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T01:35:21.856483995Z","hostname":"oxz_crucible_c01daf8e-bcf3-4a86-98b5-fc5856e4a472","pid":23129,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-05T01:35:21.865938838Z","hostname":"oxz_crucible_c01daf8e-bcf3-4a86-98b5-fc5856e4a472","pid":23129,"zonename":"\"oxz_crucible_c01daf8e-bcf3-4a86-98b5-fc5856e4a472\""}
[ Sep  5 01:35:21 Method "start" exited with status 0. ]