| 1 | | [ Sep 5 02:30:03 Enabled. ] |
| 2 | | [ Sep 5 02:30:03 Rereading configuration. ] |
| 3 | | [ Sep 5 02:30:05 Rereading configuration. ] |
| 4 | | [ Sep 5 02:30:08 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-09-05T02:30:08.513Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService23
|
| 7 | 2026-09-05T02:30:08.528Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService23
|
| 8 | 2026-09-05T02:30:08.540Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-09-05T02:30:08.545Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-09-05T02:30:08.553Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService23"
static address = fd00:1122:3344:101::19
|
| 11 | 2026-09-05T02:30:09.009Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-09-05T02:30:09.018Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_c466d868-94ce-44d1-b181-a5c9b50f6199"
|
| 13 | | [ Sep 5 02:30:09 Method "start" exited with status 0. ] |