[ Sep  7 00:26:16 Enabled. ]
[ Sep  7 00:26:16 Rereading configuration. ]
[ Sep  7 00:26:19 Rereading configuration. ]
[ Sep  7 00:26:23 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService25 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:26:23.761503321Z","hostname":"oxz_crucible_8fae8984-a533-4b2b-8dc7-efcdad7cecde","pid":24909,"datalink":"oxControlService25"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:26:23.768360553Z","hostname":"oxz_crucible_8fae8984-a533-4b2b-8dc7-efcdad7cecde","pid":24909,"datalink":"oxControlService25"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:26:23.775812393Z","hostname":"oxz_crucible_8fae8984-a533-4b2b-8dc7-efcdad7cecde","pid":24909}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:26:23.779513372Z","hostname":"oxz_crucible_8fae8984-a533-4b2b-8dc7-efcdad7cecde","pid":24909}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:26:23.783221601Z","hostname":"oxz_crucible_8fae8984-a533-4b2b-8dc7-efcdad7cecde","pid":24909,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService25\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:26:24.237544101Z","hostname":"oxz_crucible_8fae8984-a533-4b2b-8dc7-efcdad7cecde","pid":24909,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:26:24.243849677Z","hostname":"oxz_crucible_8fae8984-a533-4b2b-8dc7-efcdad7cecde","pid":24909,"zonename":"\"oxz_crucible_8fae8984-a533-4b2b-8dc7-efcdad7cecde\""}
[ Sep  7 00:26:24 Method "start" exited with status 0. ]