| 1 | | [ Sep 7 00:23:16 Enabled. ] |
| 2 | | [ Sep 7 00:23:16 Rereading configuration. ] |
| 3 | | [ Sep 7 00:23:17 Rereading configuration. ] |
| 4 | | [ Sep 7 00:23:18 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2026-09-07T00:23:18.032Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService4
|
| 7 | 2026-09-07T00:23:18.037Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService4
|
| 8 | 2026-09-07T00:23:18.043Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2026-09-07T00:23:18.045Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2026-09-07T00:23:18.048Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService4"
static address = fd00:1122:3344:101::1b
|
| 11 | 2026-09-07T00:23:18.502Z | INFO | zone-setup: Ensuring there is an underlay route
gateway = fd00:1122:3344:101::1
|
| 12 | 2026-09-07T00:23:18.508Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_ntp_2930b806-5057-410a-adb0-26cb9d3affe4"
|
| 13 | | [ Sep 7 00:23:18 Method "start" exited with status 0. ] |