[ Sep  7 00:45:28 Enabled. ]
[ Sep  7 00:45:28 Rereading configuration. ]
[ Sep  7 00:45:28 Rereading configuration. ]
[ Sep  7 00:45:32 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService26 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.235612675Z","hostname":"oxz_crucible_a57a008d-6f42-44f4-ac3b-9aee2b0658b2","pid":28572,"datalink":"oxControlService26"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.249204601Z","hostname":"oxz_crucible_a57a008d-6f42-44f4-ac3b-9aee2b0658b2","pid":28572,"datalink":"oxControlService26"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.267886024Z","hostname":"oxz_crucible_a57a008d-6f42-44f4-ac3b-9aee2b0658b2","pid":28572}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.272562901Z","hostname":"oxz_crucible_a57a008d-6f42-44f4-ac3b-9aee2b0658b2","pid":28572}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.278018496Z","hostname":"oxz_crucible_a57a008d-6f42-44f4-ac3b-9aee2b0658b2","pid":28572,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService26\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.734462249Z","hostname":"oxz_crucible_a57a008d-6f42-44f4-ac3b-9aee2b0658b2","pid":28572,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.744645062Z","hostname":"oxz_crucible_a57a008d-6f42-44f4-ac3b-9aee2b0658b2","pid":28572,"zonename":"\"oxz_crucible_a57a008d-6f42-44f4-ac3b-9aee2b0658b2\""}
[ Sep  7 00:45:32 Method "start" exited with status 0. ]