[ Sep  7 00:45:28 Enabled. ]
[ Sep  7 00:45:28 Rereading configuration. ]
[ Sep  7 00:45:29 Rereading configuration. ]
[ Sep  7 00:45:31 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.044568909Z","hostname":"oxz_crucible_9dabec8c-cff5-4e79-80ef-bdc0e979508b","pid":28490,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.056041347Z","hostname":"oxz_crucible_9dabec8c-cff5-4e79-80ef-bdc0e979508b","pid":28490,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.068294125Z","hostname":"oxz_crucible_9dabec8c-cff5-4e79-80ef-bdc0e979508b","pid":28490}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.073078992Z","hostname":"oxz_crucible_9dabec8c-cff5-4e79-80ef-bdc0e979508b","pid":28490}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.077675592Z","hostname":"oxz_crucible_9dabec8c-cff5-4e79-80ef-bdc0e979508b","pid":28490,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is an underlay route","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.538496876Z","hostname":"oxz_crucible_9dabec8c-cff5-4e79-80ef-bdc0e979508b","pid":28490,"gateway":"fd00:1122:3344:101::1"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-09-07T00:45:32.548146039Z","hostname":"oxz_crucible_9dabec8c-cff5-4e79-80ef-bdc0e979508b","pid":28490,"zonename":"\"oxz_crucible_9dabec8c-cff5-4e79-80ef-bdc0e979508b\""}
[ Sep  7 00:45:32 Method "start" exited with status 0. ]